VCOM USB Driver for Flashing Firmware

Assistant AS-503 TARGET Enable USB Debugging

If you are the owner of the Assistant AS-503 TARGET and you want to know; how to enable USB debugging on your Assistant AS-503 TARGET. Here we will guide you how to enable USB debugging mode on your AS-503 TARGET. using Developer Options, you can easily customize animations, background processes, USB cable settings, etc.

Quick Steps to enable USB debugging Mode in your Assistant AS-503 TARGET

Step 01: First of all, go to Settings your Assistant AS-503 TARGET

Step 02: Now, you will see Settings option >>>> select About phone then choose >>>> Software Information.

Step 03: Now, Scroll down your screen and find the Build Number your Assistant AS-503 TARGET, now tap the Build number 7 to 10 times until you will see a pop-up message that says "Developer mode has been enabled".

Step 04: After 10 minutes, you will see a popup message "you are now a developer" on your Assistant AS-503 TARGET

Step 05: Now, you will see the Developer options menu under Settings via Tap on the Back button.

Step 06: Then, You will click on Developer options. Slide the "Developer Options" button to "On".

Step 07: Then scroll down your phone screen and turn on "USB debugging". You will see the messages "Allow USB Debugging", click the "OK".

developer option

Now, you have successfully enabled USB debugging mode on Assistant AS-503 TARGET.

Read Me Once We are not responsible for any damage to your Assistant AS-503 TARGET while doing anything with USB Debugging. You must create a backup of all files and save them in a safe location.