How To Enable USB Debugging Mode On Wind Z35CL

by Editorial Staff

Enable USB Debugging mode on Wind Z35CL

Enable USB debugging mode on your Wind  Z35CL
If you are the owner of the Wind Z35CL and you want to know; how to enable USB debugging on your Wind Z35CL. Here we will guide you how to enable USB debugging mode on your Z35CL. using Developer Options, you can easily customize animations, background processes, USB cable settings, etc.

Quick Steps to enable USB debugging Mode in your Wind Z35CL

Step 01: First of all, go to Settings your Wind Z35CL
Step 02: Now, you will see Settings option >>>> select About phone then choose >>>> Software Information.
Step 03: Now, Scroll down your screen and find the Build Number your Wind Z35CL, now tap the Build number 7 to 10 times until you will see a pop-up message that says "Developer mode has been enabled". (see attached below image)

Step 04: After 10 minutes, you will see a popup message "you are now a developer" on your Wind Z35CL
Step 05: Now, you will see the Developer options menu under Settings via Tap on the Back button.
Step 06: Then, You will click on Developer options. Slide the "Developer Options" button to "On".
Step 07: Then scroll down your phone screen and turn on "USB debugging". You will see the messages "Allow USB Debugging", click the "OK".

Now, you have successfully enabled USB debugging mode on Wind Z35CL.

Note: We are not responsible for any damage to your Wind Z35CL while doing anything with USB Debugging. You must create a backup of all files and save them in a safe location.

Copyright © 2023 All rights reserved.