How To Enable USB Debugging Mode On EKO Omega Q52

by Editorial Staff

Enable USB Debugging mode on EKO Omega Q52

Enable USB debugging mode on your EKO  Omega Q52
If you are the owner of the EKO Omega Q52 and you want to know; how to enable USB debugging on your EKO Omega Q52. Here we will guide you how to enable USB debugging mode on your Omega Q52. using Developer Options, you can easily customize animations, background processes, USB cable settings, etc.

Quick Steps to enable USB debugging Mode in your EKO Omega Q52

Step 01: First of all, go to Settings your EKO Omega Q52
Step 02: Now, you will see Settings option >>>> select About phone then choose >>>> Software Information.
Step 03: Now, Scroll down your screen and find the Build Number your EKO Omega Q52, now tap the Build number 7 to 10 times until you will see a pop-up message that says "Developer mode has been enabled". (see attached below image)

Step 04: After 10 minutes, you will see a popup message "you are now a developer" on your EKO Omega Q52
Step 05: Now, you will see the Developer options menu under Settings via Tap on the Back button.
Step 06: Then, You will click on Developer options. Slide the "Developer Options" button to "On".
Step 07: Then scroll down your phone screen and turn on "USB debugging". You will see the messages "Allow USB Debugging", click the "OK".

Now, you have successfully enabled USB debugging mode on EKO Omega Q52.

Note: We are not responsible for any damage to your EKO Omega Q52 while doing anything with USB Debugging. You must create a backup of all files and save them in a safe location.

Copyright © 2023 All rights reserved.