If you are looking for the VCOM USB Driver, and want to install it on your computer. Then, you are the right, on this page, you will learn how to install VCOM USB Driver on your computer. In this post, you will get an official link to download the VCOM Driver.
itel A14 Plus W4002 VCOM USB Driver for Flashing Firmware
Download in progress…
How to connect itel A14 Plus W4002 with Windows 11, 10, 8.1, 7 64bit or 32bit using VCOM Driver
Here you will learn how to install VCOM USB Driver on your laptop/PC step by step. If you didn't understand the above video tutorial. You can follow the images, and we also attached a few images for your reference.
First of all, you need to download the USB driver and extract it on your desktop,
Now, You should open Device Manager >>> Action >>> Add legacy hardware.
After that, click the Next button to Add legacy hardware wizard.
Now, You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next button.
After successfully done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:
Now, Click on Have Disk Button > Locate at the Android VCOM Driver (Android_Gadget_CDC_driver.inf) on your Computer.
Once VCOM Driver is listed in the blank area, now click on Next button to continue.
Now, Again Click on Next Button.
Now, you will see a pop-up message "Install this driver software anyway" in the Windows security prompt window. If you would like to install, you need to click the correct option.
Finally, you have done successfully, click the Finish button to complete the installation.
Cool, you may enjoy your itel A14 Plus W4002 is now connected with your Windows 11, 10, 8.1, 7 64bit anor 32bit.
Read Me Once
Mediatek VCOM USB Driver process will affect your itel A14 Plus W4002 phone data like images, videos, and files. We advise you before start VCOM USB Driver you need to create a backup and save it in a safe location.