Huawei P8 Lite 2017 PRA-TL00A Enable USB Debugging

by Editorial Staff
Enable USB debugging mode on your Huawei P8 Lite 2017 PRA-TL00A
If you are the owner of the Huawei P8 Lite 2017 PRA-TL00A and you want to know; how to enable USB debugging on your Huawei P8 Lite 2017 PRA-TL00A. Here we will guide you how to enable USB debugging mode on your P8 Lite 2017 PRA-TL00A. using Developer Options, you can easily customize animations, background processes, USB cable settings, etc.

Quick Steps to enable USB debugging Mode in your Huawei P8 Lite 2017 PRA-TL00A

Step 01: First of all, go to Settings your Huawei P8 Lite 2017 PRA-TL00A
Step 02: Now, you will see Settings option >>>> select About phone then choose >>>> Software Information.
Step 03: Now, Scroll down your screen and find the Build Number your Huawei P8 Lite 2017 PRA-TL00A, now tap the Build number 7 to 10 times until you will see a pop-up message that says "Developer mode has been enabled". (see attached below image)

Step 04: After 10 minutes, you will see a popup message "you are now a developer" on your Huawei P8 Lite 2017 PRA-TL00A
Step 05: Now, you will see the Developer options menu under Settings via Tap on the Back button.
Step 06: Then, You will click on Developer options. Slide the "Developer Options" button to "On".
Step 07: Then scroll down your phone screen and turn on "USB debugging". You will see the messages "Allow USB Debugging", click the "OK".


Now, you have successfully enabled USB debugging mode on Huawei P8 Lite 2017 PRA-TL00A.

Note: We are not responsible for any damage to your Huawei P8 Lite 2017 PRA-TL00A while doing anything with USB Debugging. You must create a backup of all files and save them in a safe location.

Copyright © 2022 Mobilewithdrivers.com. All rights reserved.