If you are looking to download Bloom S220 SPD Upgrade Tool (SpreadTrum Flash Tool) for Windows 11,10,8,7. Then you are on the right page, here you can download SPD Flash Tool for all versions. No doubt, that it allows you to flash or install any .pac file, or you can also install stock ROM, the firmware on Bloom S220 using this tool.
Here, you can see all versions files, we always recommend to everyone, download the latest version file.
Yes! It comes as a portable application, that's why you can't install it on your Windows 11 computer. First of all, you need to download and extract this tool on your Windows 11, 10, Now, open the UpgradeDownload.exe file to launch the Application.
If your device is powered by Spreadtrum or Unisoc, and you would like to install stock ROM or want to Flash Stock Firmware on your S220.Step 2
Make sure that, you have the correct .pac firmware of your Device.Step 3
First of all, install the SPD Driver.Step 4
Now, Launch the Tool, and click on the Load Packet button.Step 5
After that, Locate the .pac file on your computer from the firmware folder.Step 6
Finally, click on Start Downloading Button to start the Flashing process.
Yes, of course, it supports only Spreadtrum/Unisoc Chipset-based devices, phones, tablets. If you have installed the Spreadtrum Drivers on your Windows 11, Mac, Linux. Then, you can easily check the connected devices using the Upgrade Tool. After that, you can flash the firmware on the device.
If you are the owner of the Spreadtrum/Unisoc Device, and looking to flash your Bloom S220 with the SPD upgrade flash tool then make sure you have the correct .pac and .p5c based Stock ROM, Firmware. If you are using Spreadtrum/Unisoc Smartphone, then you can easily check the .pac file.
Copyright © 2022 Mobilewithdrivers.com. All rights reserved.